| 1. Making a Morgan
Model by David Farmer
2. DASHES
2.1 Burl
Walnut & Maple Laminates
2.2 Clear-Coating Wood
2.3 Laminating the Plastic Column Surround
2.4 Refinishing a Mahogany
Dash
2.5 Refinishing a Mahogany Dash
II
2.6 Refinishing a Wooden Dash
III
3. DOORS
3.1 Frames
(Refitting)
3.2 Panels
3.3 Hinges
|
4. THE BODY
4.1 Attaching
the Front and Rear
4.2 Dismanteling
the Wooden Tub
4.3 Fasteners
4.4 Fastener Problems & Fixes
4.5 Finishing Up
4.6 Front
Half of the Body
4.7 Fuel
Tank Bed
4.8 Making
New Wooden Parts
4.9 Making the Wooden Tub
4.10 Mounting
the Body Frame (Steps)
4.11 Mounting
the Body Frame on the Chassis
4.12 Mounting
the Firewall
4.13 Rear Fender
Arch
|
4.14 Removing a Broken or Sheared Woodscrew
4.15 Repairing Holes in Wood
4.16 Trunk/boot
5. OPTIONS & PRESERVATION
5.1 Cuprinol Alert Sheet
5.2 Sealing
the Wood
5.3 Storage Box
(in car creation)
5.4 Storage
Containers (in car creation)
5.5 Wooden Tool
Box (in-car creation)
5.6 Repairing a Screw Hole
6. TYPES & THEIR
PROPERTIES
6.1 Morgan Ash
6.2 Wood Types and Their
Properties
|
